日韩a级一片-日韩a免费-日韩a视频-日韩va-大香交伊人-大香焦久久

臺灣SINGUNO信之諾SNEC-AMC糾偏控制器

現在臺灣在使用自動對邊機的已經普級化了 , 從以前最早期的氣油壓式自動對邊機 , 到現在的電眼
式油壓對邊機及電眼式馬達驅動器自動對邊機 .
The Automatic Edge Position control machine in Taiwan has been common used for a long
time. From the hydraulic-pneumatic type in the earlier period to the hydraulic-pneumatic
Edge in EPC Sensor Position control and EPC Sensor motors till now.
因?yàn)楝F(xiàn)在傳統的氣壓式自動對邊機在臺灣使用已經有十幾年以上的時間 , 漸漸有許多的客戶在反
應 , 氣油壓式自動對邊機的缺點如下 .
Because the barometric type Automatic Edge Position control has been used for more than ten
years in Taiwan, the reaction given to by customers grow gradually. The defects of such type
machine as follows:
(1). 油箱體積大且笨重,不易安裝在機臺內部 .
(1). The fuel tank physical volume is big and bulky, not easily set up in inner part of the
machine.
(2). 氣壓式檢出器會在佔空間、設計組裝困難（許多場合無法使用例如：布、網眼等透氣材質或材
料本身有棉絮或粉塵）.
(2). The barometric type detector will occupy the space of the machine and has difficult in
design and assembling. (It is unable to use in many situations, for example: well
ventilated material such as cloth, mesh of net, or material has fluffed cotton or dust on
the face of it.)
(3). 氣油壓式有噪音及油壓的污染問題 .
(3). Annoy hydraulic-pneumatic type machine has the problems of noisy and environmental
pollution in use.
(4). 耗件多(如碳刷片、膜片、電磁閥濾心、油品)，不易拆裝保養，且維修費用高 .
(4). The utilization of consumptive materials is a lot (such as the carbon brushes slice, the
membrane, electromagnetism valve Filter heart, oil article , etc.), not easily to give
maintain service, and the cost for maintain is too high.
(5). 傳統控制線路，耗費材料工時，故障率高 .
(5). Using the traditional control circuit costs a lot of materials and labor hours, and has
high defect rate.
(6). 外觀簡陋、搭配機器時，破壞機器整體質感 .
(6). The appearance is rough, not suitable for attached machine and diminishes the good
quality of the machine.
以上的種種問題是現在氣油壓式自動對邊機無法改善的問題 , 所以越來越多的客戶開始改用進口
的自動對邊機 , 改善傳統對邊機的問題 .
Because the above various problems that the hydraulic-pneumatic type Automatic
Edge Position control still can’t improve now, more and more customers start to use
the Automatic Edge Position control instead, so that could improve the quality of the
traditional type of Edge Position control and solve the problems it has now.
現在對於自動對邊機的品質要求越來越高 .因?yàn)楝F(xiàn)在自動對邊機需求量也越來越大 .
Due to the market demand for the Automatic Edge Position control getting higher, the
request for the quality of the Automatic Edge Position control getting increased.
SINGUNO 在自動對邊機這方面有許多的經驗 , 也看過許多做自動對邊機的機械廠 , 我們聽許多
客戶的反應各家自動對邊機的缺點 .
SINGUNO has many experiences about above parts in Automatic Edge Position
control and reference to many EPC makers; also we took lessons from customers’
reactions about the defects of current EPC products.
SINGUNO 在電子式自動對邊機 , 改善了傳統對邊機的缺點及現在市面上銷售的電子式自動對邊
機所無法解決的問題 .
SINGUNO revises the defects of the traditional EPC and solve the problems that the
current electronics type Automatic Edge Position control has on the market.
在同等級的產品上，以更優勢的質量及功能提供客戶選擇使用 .
On the equal class of the product, we provide the excellent quantity and more
convenient functions to our customers.
信之諾糾偏常用型號：
SNEC-K100
SNEC-K150
SNEC-KFA100
SNEC-KFA150
SNEC-L10
SNEC-L150
SNEC-C160
SNEC-C250
SNEC-C400
SNEC-C600
SNEC-AMC
SNEC-800
SNEC-EC
SNEC-OC
SNEC-40X150L
SNEC-PT02
SNEC-C
SNEC-C180
SNEC-TN06A
SNEC-TN06B
SNEC-PT800
SNEC-PT01
SNEC-USS01
SNEC-K150
SNEC-L150
SNEC-002
SNEC-OO2
SNEC-OA
SNEC-0A
SNEC-00
SNEC-OO
SNEC-C160
SNEC-C250
SNEC-K100
SNEC-K150
SNEC-L100
信之諾糾偏控制器、電眼、推動器實物圖展示：