日韩a级一片-日韩a免费-日韩a视频-日韩va-大香交伊人-大香焦久久

鐵路遮板模具模具的成型工藝主要有兩種，一種是現澆，這種工藝指的是現將模具在特定的地方加以固定，然后在模具與墻體間注入適量的混凝土，待其成型，取其模具。另一種是預制模具。這種工藝，通常是先將模具制作而成，然后在模具內側注入適量混凝土，等待成型，拆掉模具。鐵路遮板模具的成型工藝就是第二種成型工藝。這樣生產出來的遮板更為細致，穩定性較高，不易變形，更符合市場的需求。如何讓客戶正確使用遮板鋼模具是我們廠家的責任，關于鋼模具漏漿的問題大大影響了遮板鋼模具的發展，造成漏漿的最主要的原因是焊接的時候沒能做到每個面的百分百的銜接，工人的粗心大意，其次是螺栓卡扣安裝的不穩固。還有就是鋼模具生銹的問題，鋼模具雖然比塑料模具抗摔，抗壓也抗腐蝕，但是最脆弱的一點就是怕生銹，一旦生銹再生產水泥預制件尺寸就會不規整，表面效果也會大打折扣，所以在使用完模具以后首先將模具里的石灰用掃帚清掃干凈，在用清水沖洗干凈，然后放置在干燥的地方晾干儲存。正確的使用和保養模具會節省大量的成本。

There are two kinds of molding technology for the mould of railway shutter, one is cast-in-place, which means to fix the mould in a specific place, and then inject a proper amount of concrete between the mould and the wall, wait for the mould to be formed, and take the mould. The other is prefabricated mold. In this process, the mould is usually made first, and then a proper amount of concrete is injected into the inner side of the mould, waiting for forming, and the mould is removed. The forming process of railway shutter mould is the second one. The shutters produced in this way are more meticulous, stable, not easy to deform, and more in line with the market demand. How to let the customer use the shutter steel mold correctly is the responsibility of our factory. The problem of the leakage of the steel mold greatly affects the development of the shutter steel mold. The main reason for the leakage of the slurry is the failure to achieve 100% connection of each surface during welding, the carelessness of the workers, and the unstable installation of the bolt buckle. There is also the problem of steel mold rusting. Although steel mold is more resistant to falling and pressure and corrosion than plastic mold, the most vulnerable point is to be afraid of rusting. Once the rust is produced, the size of cement prefabricated parts will be irregular, and the surface effect will be greatly reduced. Therefore, after using the mold, first clean the lime in the mold with a broom, and then wash it with clean water Store in a dry place. The correct use and maintenance of the mold will save a lot of costs.