日韩a级一片-日韩a免费-日韩a视频-日韩va-大香交伊人-大香焦久久

宏旭—污水溝蓋板模具—排水溝溝蓋板模具

由于隧道電纜溝蓋板模具形狀復雜，精度要求高，制造周期長，因此在隧道電纜溝蓋板模具生產過程中也限定了電纜槽蓋板模具的大規模生產必須采用高性能材料。最后為了保證隧道電纜溝蓋板模具的生產成本在生產形狀簡單、應力小、容易制造的蓋板模具時可采用普通鋼、鑄鐵甚至非金屬制造，從而確保電纜槽蓋板模具的良好應用。模具加工是材料成型的重要方式之一，與機械加工相比，具有工序少、材料利用率高、能耗低、易生產、效益高等優點，簡單介紹一下產品的生產工藝，針對于電纜槽蓋板模具來說，選用五個厚的，一個厚的肋筋，會更加合適一點。

Due to the complex shape, high precision requirements and long manufacturing cycle of tunnel cable trench cover plate mold, high-performance materials must be used in large-scale production of tunnel cable trench cover plate mold. Finally, in order to ensure the production cost of the tunnel cable trench cover plate mold, ordinary steel, cast iron and even non-metallic manufacturing can be used to produce the cover mold with simple shape, small stress and easy to manufacture, so as to ensure the good application of the mold for the cable trench cover plate. Mold processing is one of the important ways of material forming. Compared with mechanical processing, it has the advantages of less process, high material utilization, low energy consumption, easy production and high efficiency. This paper briefly introduces the production process of the product. For the mold of cable trough cover plate, it is more appropriate to select five thick ribs and one thick rib.