廣東臺銘實業有限公司
廣東臺銘實業有限公司
店齡5年 · 企業認證 · 廣東省東莞市
主營產品: 大功率LED燈珠, led燈珠, 貼片led燈珠, 0603貼片led燈, 0805貼片led燈, 視覺光源led燈珠, 1206貼片led燈, 全光譜led燈珠, COB 面光源, 紅外線接收頭, 數碼管, 汽車照明led燈珠, 安防led產品, 0201貼片LED燈, 貼片側發光led燈, 直插led燈珠, 雙色led燈珠, 帶座led燈珠, UV紫光LED燈珠, led燈珠廠家, 光敏三極管, 紅外對管, 食人魚led燈珠, 5050rgbw, 5050rgb燈珠, 3535rgb全彩, 2835貼片led燈, 3030全光譜led
免費會員
手機掃碼查看 移動端的落地頁
店齡5年 · 企業認證 · 廣東省東莞市
憩憤憪憬憧憫憤憪憧憪憧
臺灣臺銘實業3mm直插紅翠綠雙色共陽-發光二極管
價格
訂貨量(個)
¥0.01
≥50000
店鋪主推品 熱銷潛力款
聯系人 陳子華 業務經理
憩憤憪憬憧憫憤憪憧憪憧
發貨地 廣東省東莞市
在線客服
商品參數
|
商品介紹
|
聯系方式
品牌 臺銘實業
封裝 1000
應用領域 視覺光源
產品類型 直插
應用范圍 玩具
電流 20mA
電壓 1.8-2.4V
發光顏色 紅翠綠雙色
外包裝 led封裝
亮度 2-3LM
商品介紹
臺銘直插式LED,體積小,高亮度,能耗低,應用于照明,背光,指示等領域。
注:發光顏色、亮度、色溫均可按客戶要求做貨。
Type 規格/型號 | Emitting Color 顏色 | Material 原材料 | View Angle 發光角度 | VF(V) 電壓 | IV (MCD) 亮度 | WL(nm) 波長 | IF(MA) 電流 | |||
Typ | Max | Min | Typ | Min | Max | |||||
TM-L03RPG-E (紅、黃綠雙色) | Red | AlGaInP | 25° | 1.8 | 2.4 | 80 | 120 | 620 | 630 | 20MA |
Yollow Green | AlGaInP | 30 | 60 | 565 | 575 | |||||
TM-L03RB-E (紅、藍雙色) | Red | AlGaInP | 25° | 1.8 | 2.4 | 80 | 120 | 620 | 630 | 20MA |
Blue | IGaN/GaN | 2.8 | 3.4 | 80 | 100 | 460 | 475 | |||
TM-L03OCG-E (橙、翠綠雙色) | Orange | AlGaInP | 25° | 1.8 | 2.4 | 30 | 60 | 600 | 610 | 20MA |
Green | AlGaInP | 2.8 | 3.4 | 800 | 1500 | 520 | 530 | |||
TM-L03BCG-E (藍、翠綠雙色) | Blue | IGaN/GaN | 25° | 2.8 | 3.4 | 80 | 100 | 460 | 475 | 20MA |
Green | 800 | 1500 | 520 | 530 | ||||||
TM-L03OPG-E (橙、黃綠雙色) | Orange | AlGaInP | 25° | 1.8 | 2.4 | 30 | 60 | 600 | 610 | 20MA |
White | IGaN/GaN | 2.8 | 3.4 | 30 | 60 | 565 | 575 |
Supporter shaping:
Shaping of the supporter must be conducted before welding. While shaping, the
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.
bending position of the supporter must at least be located at 3mm from the bottom
of the encapsulating resin. Also, avoid multiple bending on the same position。 Please
choose the
appropriate apparatus to fixate the supporter in order to avoid exerting extra pressure
on resin. Using the jointing section of the pin and resin as fulcrum is strictly
prohibited since the pressure mounted would directly damage the internal 。
illuminating structure and thus cause irreversible defection of the product..Due to the
same reason, the interval between the welding hole on the PCB board should be
strictly matched with the pin interval of the product when assembling the product.
- 應用范圍::照明、指示、背光等
聯系方式
公司名稱 廣東臺銘實業有限公司
聯系賣家 陳子華 (QQ:3191427098)
電話 憧憥憫憪-憦憥憬憦憤憭憦憭
手機 憩憤憪憬憧憫憤憪憧憪憧
傳真 憧憥憫憪-憦憥憬憦憤憭憦憭-憦憧憦
地址 廣東省東莞市
聯系二維碼