日韩a级一片-日韩a免费-日韩a视频-日韩va-大香交伊人-大香焦久久

產品名稱：12V潛水泵控制器

品牌：Solinst

產地：加拿大

型號：412

Solinst 12V 潛水泵提供了一種從監測井中清除和獲取地下水樣本的有效方法。

12V 潛水泵和 12V 泵控制器重量輕、便攜，易于設置、部署和操作。還可以選擇使用專門設計的井蓋專用泵。泵的時尚、短設計確保它可以輕松安裝在井下而不會掛斷。

Solinst 12V 潛水泵能夠從地表以下 36.5 m (120 ft) 抽取地下水，在淺水條件下的流速高達 13.5 L/min (3.6 US gpm)。

Solinst 12V 潛水泵系統包括帶電纜的 12V 潛水泵、12V 泵控制器、采樣管（單獨出售）和用戶提供的電源。

12V 潛水泵電纜只需連接到 12V 泵控制器，然后夾到 12V 電源（單獨提供）。將 3/8" (9.5 mm) 內徑 LDPE 樣品管推到 12V 泵上的倒鉤接頭上。

控制器上方便的 LED 燈指示 12V 潛水泵系統的狀態，包括電池電壓高低、電池連接正確、正常運行和**流量。它有一個易于復位的斷路器（無需更換保險絲）。

只需順時針轉動 12V 泵控制器上的刻度盤即可增加控制器的電壓，從而更快地轉動泵的電機并增加流量。

 

操作非常簡單，可從高流量調整到低流量

光滑、短（標稱 6 英寸）泵設計可避免卡在不直或不垂直的井中

安裝在標稱 2" OD Sched. 40 或 80 PVC 管內

方便的 LED 燈指示 12V 泵控制器狀態和泵運行

輕巧、緊湊、便攜的系統；也是長期項目的專用井帽選項

 

用于普通化學的高流量和低流量地下水采樣

高吹掃速率是使用三體積吹掃協議進行采樣時的理想選擇

在高 K（水導率）環境中執行恒壓頭測試時很有用

采樣深度：地表以下 36.5 m (120 ft)

流量：高達 13.5 升/分鐘（3.6 美制加侖/分鐘）

泵電纜長度：25、50、75、100 和 130 英尺（7.5、15、23、30 和 40 m）

泵電纜重量：3.5 kg (7.8 lbs)（130 ft (40 m) 電纜長度）

潤濕材料：ABS 泵體、304 不銹鋼電機、葉輪和吊環螺栓、聚丙烯排放口和軟管倒鉤、丁腈/丁腈橡膠 O 形圈和密封件、PVC 護套電線

泵尺寸：外徑 4.78 厘米 x 長 13.97 厘米（1.88" x 5.5"）

泵重量：0.8 公斤（1.8 磅）

控制器尺寸：33 厘米 x 13 厘米 x 17 厘米（13 英寸 x 5 英寸 x 6.5 英寸）

控制器重量：3.4 公斤（7.5 磅）

控制器電纜長度：1 米（3.5 英尺）

能量源：12V 深循環 60 amp AGM 電池或更大，或車輛或船用電池

所需電壓：12.5V–15V 源極

功耗：20mA（撥盤關閉時），3A（撥盤位于 1）至 36A（撥盤位于 MAX (10)）

**限度。運行：持續，只要泵在運行期間完全浸沒

保修單：12V 潛水泵：90 天

12V 泵控制器：3 年

中文內容來自機器翻譯，內容僅供參考，實際內容可參考原廠介紹或以合同為準。

英文原文：

The Solinst 12V Submersible Pump provides an efficient means of purging and obtaining groundwater samples from monitoring wells.

The 12V Submersible Pump and 12V Pump Controller are lightweight, portable, and easy to set up, deploy and operate. There is also the option to dedicate the pump using a specially designed well cap. The Pump's sleek, short design ensures it fits easily down wells without hang-ups.

The Solinst 12V Submersible Pump is capable of pumping groundwater from 36.5 m (120 ft) below ground surface, with flow rates up to 13.5 L/min (3.6 US gpm) in shallow conditions.

 

Solinst 12V Pump Design and Operation：

The Solinst 12V Submersible Pump system comprises the 12V Submersible Pump with cable, 12V Pump Controller, sample tubing (sold separately), and a user-supplied power source.

The 12V Submersible Pump cable simply connects to the 12V Pump Controller, which then clips to a 12V power source (sourced separately). The 3/8" (9.5 mm) ID LDPE sample tubing is pushed onto the barbed fitting on the 12V Pump.

Convenient LED lights on the Controller indicate the status of the 12V Submersible Pump system, including high or low battery voltage, proper battery connection, normal operation and maximum flow rate. It has an easy-to-reset circuit breaker (no fuse to replace).

Simply turn the dial on the 12V Pump Controller clockwise to increase the voltage to the Controller, which turns the Pump's motor faster and increases the flow rate.

12V Submersible Pump Features：

Very simple to operate and adjust from high to low flow rates

Smooth, short (6" nominal) Pump design avoids getting stuck in wells that aren't straight or plumb

Fits inside Nominal 2" OD Sched. 40 or 80 PVC Pipe

Convenient LED light indicates 12V Pump Controller status and Pump operation

Lightweight, compact, portable system; also a dedicated well cap option for longer term projects

 

12V Submersible Pump Applications：

High and low-flow groundwater sampling for general chemistry

High purge rates ideal when sampling using three volume purge protocol

Useful when performing constant head tests in environments with high K (hydraulic conductivity)

415 12V Submersible Pump Specifications：

Sampling Depth:    As much as 36.5 m (120 ft) below ground surface

Flow Rates:    Up to 13.5 L/min (3.6 US gpm)

Pump Cable Lengths:    25, 50, 75, 100 and 130 ft (7.5, 15, 23, 30 and 40 m)

Pump Cable Weight:    3.5 kg ( 7.8 lbs) (for 130 ft (40 m) cable length)

Wetted Materials:    ABS pump body, 304 stainless steel motor, impeller and eyebolt, poly-propylene discharge outlet and hose barb, nitrile/ buna o-rings and seals, PVC jacket electrical wire

Pump Size:    4.78 cm OD x 13.97 cm long (1.88" x 5.5")

Pump Weight:    0.8 kg (1.8 lbs)

Controller Size:    33 cm x 13 cm x 17 cm (13" x 5" x 6.5")

Controller Weight:    3.4 kg (7.5 lbs)

Controller Cable Length:    1 m (3.5 ft)

Power Source:    12V Deep Cycle 60 amp AGM Battery or larger, or vehicle or marine battery

Voltage Required:    12.5V–15V at source

Power Draw:    20mA (when dial is OFF), 3A (dial is at 1) to 36A (dial is at MAX (10))

Max. Run Time:    Continuous, as long as Pump fully submerged during operation

Warranty:    12V Submersible Pump: 90 Days

12V Pump Controller: 3 Years