日韩a级一片-日韩a免费-日韩a视频-日韩va-大香交伊人-大香焦久久

3

Screen-Printable Adhesive

SP-7533

Product Description SP-7533 Screen-Printable Adhesive is a water-dispersed, pressure sensitive adhesive

which has been formulated to be screen printable. This product exhibits a good

combination of peel, shear and environmental aging properties.

Features/Advantages Features

? Screen printable

? High solids

? Print complicated patterns

? Water-dispersed

? High heat resistance

? Compatible with metal and plastic

Technical Data July, 1998

Typical Physical

Properties

Note: The following technical information and data should be considered representative

or typical only and should not be used for specification purposes.

Solids: 65%

Color: Milky White

Carrier: Water

Specific Gravity: 1.05

Viscosity: 28,000-40,000 CPS

pH: 7.0

Application Ideas ? Membrane Switch Keypads ? Graphics Application ? Touch Panels

? Cell Phones ? Pagers ? Audio Equipment

? Car Interior Trim ? Home Appliances ? Foam Padding

Advantages

? Low waste

? High coverage

? More versatile product designs

? Non-flammable in the wet state

? High product quality

? Broad range of applications

Screen-Printable Adhesive

SP-7533

Typical Performance

Characteristics

Note: The following technical information and data should be considered representative

or typical only and should not be used for specification purposes.

Peel Force: 180 degree peel test; 4 mil (100 micron), PET film; conditioned 120°F

(50°C) / 24 hrs; 1.4 mil (35 micron) adhesive thickness.

Substrate lb/in kgf/25 mm

Stainless Steel: 6.4 2.9

ABS: 2.9 1.3

PVC: 5.3 2.4

Polycarbonate: 2.9 1.3

Environmental Resistance: 180 degree peel test; PET 4 mil (100 microns) / ABS;

1.4 mil (35 micron) adhesive thickness.

Condition lb/in kgf/25 mm

Initial 75°F (25°C) 2.9 1.3

175°F (80°C) / 1000 hrs 5.5 2.5

140°F (60°C) / 95% Rh. / 1000 hrs 3.3 1.5

Heat Resistance: PET 4 mil (100 micron) / Stainless Steel; 1.4 mil (35 micron)

adhesive thickness.

Temperature lb/in kgm/25 mm

195°F (90°C) 2.2 1.0

Dead Load Test

Load Temperature

2.2 lb (1 kgf) 170°F (77°C)

1.1 lb (0.5 kgf) > 266°F (130°C)

- 2 -

Application Suggestions Use directly without dilution. Agitate well before using. Do not add additives such

as defoamers. Keep container tightly capped during storage. Avoid returning used

adhesive to container. Select screen mesh based on required adhesive coating

thickness and printing precision. Stainless steel, polyester and nylon wire in the

range of #70 to #150 can be used for screen mesh materials. Water resistant

materials such as acrylics or diazos should be used for mesh masking materials.

Screen-Printable Adhesive

SP-7533

- 3 -

Storage and Shelf Life Store in original container. Temperature not to exceed 105°F (40°C). Keep from

freezing.

Shelf life is 12 months from date of shipment when stored in original container and

temperature is kept between 40-95°F (5-35°C).

Some liquid separation from the adhesive during storage is normal. This liquid

should be remixed into the adhesive by low-shear, mechanical agitation. Mixing by

hand is adequate for small volumes of adhesive.

To request additional product information or to arrange for sales assistance, call toll free 1-800-362-3550.

Address correspondence to: 3M Adhesives Division, 3M Center, Building 220-7E-05, St. Paul, MN 55144-

1000. Our fax number is 651-733-9175. In Canada, phone: 1-800-364-3577. In Puerto Rico, phone: 1-809-

750-3000. In Mexico, phone: 5-728-2180.

For Additional

Information

3M MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. User is

responsible for determining whether the 3M product is fit for a particular purpose and suitable for user’s

method of application. Please remember that many factors can affect the use and performance of a 3M

Adhesives Division product in a particular application. The materials to be bonded with the product, the

surface preparation of those materials, the product selected for use, the conditions in which the product

is used, and the time and environmental conditions in which the product is expected to perform are

among the many factors that can affect the use and performance of a 3M product. Given the variety of

factors that can affect the use and performance of a 3M product, some of which are uniquely within the

user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether

it is fit for a particular purpose and suitable for the user’s method of application.

Important Notice

If the 3M product is proved to be defective, THE EXCLUSIVE REMEDY, AT 3M’S OPTION, SHALL BE

TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M

PRODUCT. 3M shall not otherwise be liable for loss or damages, whether direct, indirect, special,

incidental, or consequential, regardless of the legal theory asserted, including negligence, warranty, or

strict liability.

Limitation of Remedies

and Liability

This Adhesives Division product was manufactured under a 3M quality system registered to ISO 9002

standards.

ISO 9002

Refer toProduct Label and Material Safety Data Sheet for Health and Safety Information before

using this product.

Precautionary

Information

- 4 -

3

Adhesives Division

3M Center, Building 220-7E-05

St. Paul, MN 55144-1000

1-800-364-3577 or 651/737-6501

Printed in U.S.A.

?3M 1998 78-6900-9653-8